Filter
Top Products
Canon MultiPASS L60 User’s Manual ENGLISH
6-13Chapter 6 Sending Faxes
Setting the Resolution and Contrast
Setting the Scanning Resolution
Canon’s Ultra High Quality (UHQ
TM
) imaging technology enables you to send
faxes with a print quality that is very close to that of the original document. The
MultiPASS L60 also lets you adjust the resolution it uses in sending faxes to best
suit your particular document.
The MultiPASS L60 has three resolution settings:
½ STANDARD resolution (203 × 98 dpi) is adequate for most text documents.
½ FINE resolution (203 × 196 dpi) is suitable for documents with fine print
(smaller than the print in this sentence).
½ PHOTO resolution (203 × 196 dpi, with halftones) is for documents that
contain photographs. With this setting, areas of the document that contain
photos are automatically scanned with 64 levels of grey, rather than just two
(black and white). This gives a much better reproduction of the photos,
though transmission time is longer.
Set the resolution as follows:
1. Press RESOLUTION.
RESOLUTION
STANDARD
½ The LCD display shows the current resolution setting.
2. Press RESOLUTION until the resolution you want is displayed.
(FINE resolution with halftone)
RESOLUTION
FINE
PHOTO
STANDARD
3. Continue with the operation you wish to complete.
½ If you do not proceed with any other operation, the LCD display returns
to standby mode after about 5 seconds.
14:30 FaxOnly