Filter
Top Products
Canon MultiPASS L60 User’s Manual ENGLISH
7-6 Chapter 7Receiving Faxes
What Happens When Fax/Tel Mode is Selected
Type of call
Telephone Fax
Sending document manually
Fax
Sending document
automatically
Telephone charges-
begin for caller
MultiPASS L60 answers without ringing
RING START TIME
(Factory default setting=8
sec.)
MultiPASS L60 listens for FAX TONE
(For 8 sec.)
FAX TONE detected
Document received
automatically
(FAX TONE is detected and
the MultiPASS L60
switches to receive mode.)
FAX TONE is not detected
F/T RING TIME
(Factory default
setting=22 sec.)
MultiPASS L60 starts ringing
Pick up the handset to
talk
If you do not pick up the handset
(within 22 sec.)
F/T SW ACTION
Choose between:
RECEIVE (factory default setting) and DISCONNECT
DISCONNECT
MultiPASS L60 disconnects
the call
RECEIVE
(Factory default setting)
Not all fax machines are capable of sending a FAX TONE. For
those cases if you set the F/T SW ACTION to RECEIVE, the
MultiPASS L60 switches to receive mode automatically and
starts receiving the document. If no document comes in, it
disconnects after approximately 55 seconds.
You can select these options in the RX MODE submenu of the RX SETTINGS
menu when Fax/Tel Mode is selected. See below for details on changing the
settings.
You can also set these options from the MultiPASS Desktop Manager. See the
MultiPASS Desktop Manager User’s Guide for details.