Filter
Top Products
Canon MultiPASS L60 User’s Manual ENGLISH
11-39Chapter 11 Frequently Asked Questions
Message Error Code Cause Action
MEMORY FULL
PLEASE WAIT
– The MultiPASS L60 is
sending a fax and its
memory is full.
Wait until the fax is sent.
The MultiPASS L60
continues to send the fax
as memory becomes
available.
MEMORY USED nn% – Shows how much of the
MultiPASS L60’s
memory is in use.
If you need more memory,
print or send any
documents stored in
memory.
NO ANSWER #005 The receiving fax
machine does not
answer.
Make sure you dialled the
correct number. Try again
later.
NO RX PAPER #012 The other party’s fax
machine is out of paper
and its memory is full.
Contact the other party
and have them add paper
to their fax machine.
NO TEL # #022 The one-touch or
coded speed dialling
number has not been
registered.
Register the number. See
Chapter 5.
NOT AVAILABLE – In manual sending via
the handset, you tried
to use a one-touch
speed dialling button or
a coded speed dialling
code that has a group
registered in it.
In manual sending via the
handset, you can not send
a document to multiple
destinations. Send the
document to one
destination at a time.
PLEASE WAIT – The MultiPASS L60 is
warming up.
Wait until the time and
receiving mode appear in
the LCD display, then
begin.
REC’D IN MEMORY – The paper or toner ran
out, or a paper jam
occurred, so the
MultiPASS L60
received the document
in memory.
Add paper to the multi-
purpose tray, change the
toner cartridge, or clear the
paper jam, as needed.
When the problem is
solved, the MultiPASS L60
automatically prints the
document stored in
memory.