Filter
Top Products
Canon MultiPASS L60 User’s Manual ENGLISH
2-3Chapter 2 Setting Up Your MultiPASS L60
Choosing a Location for Your MultiPASS L60
Before unpacking your MultiPASS L60, follow these guidelines to choose an
appropriate location for the unit.
Please review the information provided in ”Safety Instructions” on pages 1-15 to
1-17, to make sure you are installing your MultiPASS L60 for safe use.
½ Put the MultiPASS L60 in a cool, dry, clean, well ventilated place:
¼ Make sure the area is free from dust.
¼ Make sure the location is not affected by extreme temperature
fluctuations, and remains between 10g and 32.5gC.
¼ Make sure the area’s relative humidity is always between 20% and 80%.
½ Keep the MultiPASS L60 away from direct sunlight.
½ If possible, place the MultiPASS L60 near an existing telephone outlet, to
allow for an easy connection of the telephone line to the unit.
½ Place the MultiPASS L60 near an electrical wall outlet that provides 200 to
240-volt AC (50 to 60 Hz) power.
½ Place the MultiPASS L60 near the PC you will be connecting it to. Make sure
you can reach it easily, as you will be using the MultiPASS L60 as a printer,
fax machine, copier, scanner, and telephone.
½ Do not plug the MultiPASS L60 into the same circuit as an appliance such as
an air conditioner, electric typewriter, television, or copier. Such devices
generate electrical noise that can interfere with your unit’s ability to send or
receive faxes.
½ Set the MultiPASS L60 on a flat, stable, vibration-free surface that is strong
enough to support its weight (about 8.6 kg).