Filter
Top Products
Canon MultiPASS L60 User’s Manual ENGLISH
11-21Chapter 11 Frequently Asked Questions
Faxing Problems
Use the following tables to solve problems that can occur when sending and
receiving faxes with the MultiPASS L60.
Sending Faxes
Problem Possible cause Solution
Cannot send a fax? The MultiPASS L60 may
have overheated and shut
itself down.
If you suspect this, unplug the
MultiPASS L60 and let it cool
for several minutes. Then plug it
back in and try sending again.
The MultiPASS L60 may not
be set for the type of
telephone line you have
(pulse/tone).
Make sure the MultiPASS L60 is
set for the type of telephone line
you have. See page 3-14 or the
MultiPASS Desktop Manager
User’s Guide. (If you are not sure
what type of line you have,
contact your local telephone
company.)
The document may not have
been set correctly in the
Automatic Document Feeder
(ADF).
Remove the document, stack it,
and feed it into the Automatic
Document Feeder (ADF) again.
The one-touch or coded
speed dialling number you
used may not be registered.
Check the content of the one-
touch or coded speed dialling
button and make sure it was
registered correctly. See Chapter
5 or the MultiPASS Desktop
Manager User’s Guide.
The receiving fax machine
may be out of paper.
Call the other party and make
sure they have paper in their fax
machine.
The MultiPASS L60 may be
sending another document
from memory.
Allow time for the current
document to finish sending.