Filter
Top Products
Canon MultiPASS L60 User’s Manual ENGLISH
2-29Chapter 2 Setting Up Your MultiPASS L60
Installing/Replacing the Toner Cartridge
The MultiPASS L60 uses a Canon FX-3 toner cartridge. The procedure below
explains how to install the cartridge for the first time, and how to replace it when
the toner runs out.
When the message CHANGE CARTRIDGE appears, the toner in the cartridge
may simply be unevenly distributed. Before replacing the cartridge, follow the
instructions on page 11-33 to evenly distribute the toner. If after doing this the
message remains displayed or the print quality is low, replace the cartridge as
described below.
Canon makes numerous cartridges. The FX-3 toner cartridge has been designed
specially for the MultiPASS L60 and is the only one Canon recommends that you
use.
1. Remove any documents and/or printed pages from the unit.
2. Make sure the MultiPASS L60 is plugged in.
3. Open the front cover by pressing the release latches on the sides of the unit.
½ Lift the cover forward to its open position.