Filter
Top Products
Canon MultiPASS L60 User’s Manual ENGLISH
5-23Chapter 5 Speed Dialling
Using Group Dialling
To send a document to a group of numbers, follow these instructions.
Be sure to adjust the document feed lever before loading your document. See
page 6-6 for more details.
1. Prepare the document and load it, face down, into the Automatic Document
Feeder (ADF).
½ If necessary, you can adjust the resolution and contrast. See page 6-13 for
more details.
2. Enter the group(s) stored under a one-touch speed dialling button(s) and/or
coded speed dialling code(s).
Ex:
TEL=Canon GROUP2
Ex:
TEL=Canon GROUP1
½ If you make a mistake when selecting a group, press the STOP button and
start again.
½ The name registered under that one-touch speed dialling button or coded
speed dialling code is displayed. If no name is registered, GROUP DIAL
is displayed.
½ If you press a one-touch speed dialling button or coded speed dialling
code that has no group (or fax number) registered under it, the LCD
displays NO TEL #. Make sure you pressed the correct one-touch speed
dialling button or entered the correct coded speed dialling code, and that
the group you want has been registered correctly under that button or
code.
½ After entering the first one-touch speed dialling button or coded speed
dialling code, you have five seconds to enter another speed dialling button
or code before the MultiPASS L60 begins sending automatically. If you
have entered more than one speed dialling button or code, the MultiPASS
L60 waits for 10 seconds before it begins sending. If you do not want the
MultiPASS L60 to send automatically, you need to change the AUTO
START TX setting. See pages 13-8 and 13-9 for more details.