Filter
Top Products
Canon MultiPASS L60 User’s Manual ENGLISH
2-15Chapter 2 Setting Up Your MultiPASS L60
Making Connections
Connecting the MultiPASS L60 to Your PC
Your MultiPASS L60 has an 8-bit, bi-directional parallel interface port that
allows you to connect it to a PC. To do this, you need to purchase a Centronics-
compatible parallel interface cable from your dealer.
For best results, use a cable that is no longer than 2 metres. Canon recommends
that you use a cable that complies with IEEE 1284. Contact your local authorised
Canon dealer if you need help in selecting a cable.
Connect the MultiPASS L60 to your computer as follows:
1. Make sure the computer is turned off and the MultiPASS L60 is unplugged.
2. Connect the parallel interface cable to your MultiPASS L60:
a. Align the cable connector with the interface port so their shapes match.
b. Gently press the cable connector into the port.
c. Secure the cable connector by snapping both wire clips (on the sides of the
port) into the cable connector, as shown below.
3. Similarly, connect the other end of the cable to the parallel interface port on
your computer.