Filter
Top Products
Canon MultiPASS L60 User’s Manual ENGLISH
6-20 Chapter 6Sending Faxes
Memory Sending
Memory sending is a quick and easy way to send a fax. The MultiPASS L60 scans
the document into its memory as it dials the fax number. If the line is free, the
MultiPASS L60 begins sending the fax as it scans the rest of the document.
The MultiPASS L60 has enough memory to store up to 90 pages (fewer if the
document contains many graphics or particularly dense text).
Follow the instructions below to send a document with memory sending:
Be sure to adjust the document feed lever before loading your document. See
page 6-6 for details.
1. Prepare the document and load it, face down, into the Automatic Document
Feeder (ADF).
½ Once the document is loaded, the LCD display shows the following:
Currently used memory:
MEMORY USED 0%
Current resolution:
STANDARD
Standby to scan:
DOCUMENT READY
½ If necessary, you can adjust the resolution and contrast. See page 6-13 for
details.
½ You may not be able to use memory sending if the percentage shown in
the MEMORY USED display is close to 100%. In this case, use manual
sending via the handset to send your document.
2. Dial the other party’s fax number.
Ex:
TEL=9p5164886700
½ Use one of the dialling methods described on page 6-17.
½ If you must first dial a digit to get an outside line (”9”, for example), add a
pause after that digit by pressing the REDIAL/PAUSE button, as shown
in the example above.