Filter
Top Products
Canon MultiPASS L60 User’s Manual ENGLISH
7-5Chapter 7 Receiving Faxes
½ F/T SWITCH ACTION
Not all fax machines are capable of sending a FAX TONE (the CNG tone
that warns the receiving fax machine that a fax is coming). For those cases the
unit may think that the call coming in is a voice call and rings to alert you of
the call (the amount of time it is going to ring is determined by the F/T RING
TIME setting above). If you do not answer the call, one of two things can
happen:
1. If you set the F/T SW ACTION to RECEIVE, the unit will switch to fax
receive mode automatically at that point and start to receive the document.
If no document comes in, it disconnects the call after approximately 35
seconds. The factory default setting is RECEIVE.
2. If you set the F/T SW ACTION to DISCONNECT, the unit will
disconnect the phone call immediately freeing up your phone line at this
point.