Filter
Top Products
Canon MultiPASS L60 User’s Manual ENGLISH
iv Preface
Notice for Connection to Telecommunication Systems in
the United Kingdom and the Republic of Ireland
Approval Number 607912
Your Canon MultiPASS L60 has been approved against the requirements of
NTR3 for use in the UK. The CE mark is applied in respect of the requirements
of 72/23 EEC and 89/336 EEC.
It is intended for connection to analogue two wire public telecommunication
networks.
Connect the supplied cable to this socket first, then to the telephone line.
This socket is intended for connection of the Canon optional telephone. If
required, an adapter to connect any piece of approved telecommunications
apparatus is available from your Canon supplier.
Canon recommend that any additional equipment connected in the installation is
connected to this ”handset” socket. Do not connect additional equipment
through parallel sockets elsewhere on the telephone line.
Voltage and current available at these sockets is determined by the network to
which the line cable is connected. They will not normally exceed the limits for
TNV as described in EN60950.
Ringer Equivalence Number (REN) = 1
The REN is a guide to help calculate the maximum number of items of apparatus
that will ring when connected simultaneously to one phone line. The total RENs
of the individual items should not exceed 4. Correct ringing may not always be
possible even when total REN does not exceed 4. The REN value of a BT
telephone is assumed to be 1 unless otherwise marked.
This equipment is not intended or recommended for making calls to emergency
services.