Filter
Top Products
Canon MultiPASS L60 User’s Manual ENGLISH
13-11Chapter 13 The Menu System
RX SETTINGS
Name Description Settings
ECM RX Enable/disable error correction during reception. ON/OFF
RX MODE Set the receive mode. You can also set the receive
mode with the RECEIVE MODE button. See
Chapter 7 for more details.
If you set Fax/Tel Mode, you can select the options
below.
FAX ONLY MODE/Fax/
Tel Mode/MANUAL
MODE/ANS. MACHINE
MODE/NET. SWITCH
If you have set Fax/Tel Mode, set the following options that control how the MultiPASS L60 handles
incoming calls.
RING START TIME Set the duration that the MultiPASS L60 listens for
a fax tone before starting to ring.
8 seconds (00 to 30)
F/T RING TIME Set the length of time the MultiPASS L60 will ring
to alert you of an incoming call.
22 seconds (10 to 60)
F/T SW ACTION Select the action taken after the F/T RING TIME
expires.
RECEIVE/
DISCONNECT
INCOMING RING When the MultiPASS L60 is set to FAX ONLY
MODE, set whether the MultiPASS L60 rings when
it receives a call.*
ON/OFF
RING COUNT Set the number of incoming rings before the
MultiPASS L60 answers.
2 times (1 to 99)**
SILENT DETECT Enable/disable whether the MultiPASS L60
automatically switches to fax receive mode if a
period of silence is detected after answering the
call.
ON/OFF
DURATION Set the duration of silence the MultiPASS L60
listens for to determine if a fax is coming in.
6 seconds (1 to 99)
MAN/AUTO SWITCH Determine if the MultiPASS L60 switches to
document receive mode after the MultiPASS L60
rings for a specified time when the MultiPASS L60
is in MANUAL MODE.
ON/OFF
RING TIME Set the amount of time the MultiPASS L60 will ring
before switching to document receive mode.
15 seconds (1 to 99)
REMOTE RX Allows you to dial a number code on the remote
extension to start receiving a document.
ON/OFF
REMOTE RX ID If you set REMOTE RX on, you can change the
remote receiving ID.
25 (00 to 99,
*
and #
included)
MEMORY RX Turn on/off memory receiving of a document. ON/OFF
(Default settings are shown in bold type)
* Even if you have set INCOMING RING to ON, the MultiPASS L60 will only ring if you have connected the optional handset or a
telephone.
** Users in Ireland cannot set the RING COUNT item.