Filter
Top Products
Canon MultiPASS L60 User’s Manual ENGLISH
11-36 Chapter 11Frequently Asked Questions
Error Codes, Messages, and Solutions
This table lists the messages that appear in the MultiPASS L60 LCD display and
the corresponding error codes that appear in activity reports, and tells what to do
for each.
Message Error Code Cause Action
AUTO REDIAL – The receiving fax
machine was busy and
the MultiPASS L60 is
waiting to redial.
–
BUSY/NO SIGNAL #005/018 The telephone number
you dialled is busy.
Try sending the document
again later.
The other party’s fax
machine is not working
properly.
Contact the other party
and have them check their
fax machine.
The other party is not
using a G3 fax machine.
Contact the other party
and have them send or
receive the document using
a G3 machine.
The telephone line type
setting on your
MultiPASS L60 is
incorrect.
Set your MultiPASS L60
for your telephone line
type (tone or pulse).
The receiving fax
machine did not answer
within 55 seconds.
Contact the other party
and have them check their
fax machine. You can also
try to send the document
manually. For an overseas
call, add pauses to the
registered number.
CALLING – The MultiPASS L60 is
calling the receiving fax
machine.
If you want to cancel the
transmission, press the
(STOP) button.
CHANGE CARTRIDGE – The toner cartridge is
empty.
Make a copy of a
document. If the printout is
light or blank, replace the
toner cartridge. Documents
received in memory will
then be printed
automatically.
The MultiPASS L60’s
image memory may be
full because the toner
cartridge ran out of
toner.
Replace the toner cartridge
and have the other party
send the fax again.