Filter
Top Products
Canon MultiPASS L60 User’s Manual ENGLISH
11-38 Chapter 11Frequently Asked Questions
Message Error Code Cause Action
DOCUMENT READY – The document in the
Automatic Document
Feeder (ADF) is ready
for scanning.
Send the fax, scan the
document, or make a copy.
ECM RX – The MultiPASS L60 is
receiving a fax using
ECM.
Faxes can take longer to
receive when using ECM.
Try turning ECM off if you
need to receive quickly, or
if you know your local
telephone lines are in good
condition. See pages 13-10
and 13-11.
ECM TX – The MultiPASS L60 is
sending a fax using
ECM.
Faxes can take longer to
send when using ECM. Try
turning ECM off if you
need to send quickly, or if
you know your local
telephone lines are in good
condition. See pages 13-8
and 13-9.
HANG UP PHONE – The handset is off its
hook.
Place the handset properly
onto its hook.
LOAD PAPER – The MultiPASS L60 is
out of recording paper.
Load paper in the multi-
purpose tray. Any
documents received in
memory will then be
printed automatically.
MEMORY FULL #037 The MultiPASS L60’s
memory is full because
it has received too
many documents, or a
very long or detailed
document.
Print out any documents
that are stored in memory.
Then start the operation
again. See pages 7-13 and
7-14.
The memory is full
because you sent too
many pages at once, or
a very long or detailed
document.
Divide the document and
send each part separately.
If the memory contains any
faxes, you do not need to
delete them.