Filter
Top Products
Canon MultiPASS L60 User’s Manual ENGLISH
13-9Chapter 13 The Menu System
TX SETTINGS
Name Description Settings
ECM TX Enable/disable error correction during
transmission.
ON/OFF
MID PAUSE SET Set the length of the pause you insert into a
dialling sequence.
2 seconds (1 to 15)*
AUTO REDIAL Set whether the MultiPASS L60 redials if it fails to
get a response on the first attempt.
ON/OFF
REDIAL TIMES Set the number of retries. 2 times (1 to 15)**
REDIAL INTERVAL Set the period of time between rediallings. 2 minutes (2 to 99)
TX ERROR RESEND Set whether the fax redials if an error occurs while
sending.
ON/OFF
RESEND TX FROM Set which pages to resend if TX ERROR RESEND
is on.
ERROR & 1ST PG/
ERROR PAGE/ALL
PAGES
ERASE FAILED TX Set whether the fax in memory is erased if an error
occurs during sending but then it is resent
successfully.
ON/OFF***
AUTO START TX ON: Scanning starts 10 seconds after the last
number is entered when sending to multiple
destinations (5 seconds if only sending to one
destination.)
OFF: After entering the last number, press the
START/COPY button, or else the MultiPASS L60
will return to standby mode after 60 seconds.
ON/OFF
(Default settings are shown in bold type)
* UK: 4 seconds (04-11)
** UK: 01-03, Ireland: 01-04
*** The default setting for Ireland is OFF.