Filter
Top Products
Canon MultiPASS L60 User’s Manual ENGLISH
G-4 Glossary
Dual access (Multitasking)
Enables the MultiPASS L60 to receive a fax, even if it is copying or printing a
document. Also enables you to load other faxes into memory, make copies, print
out reports, print documents or register information while the MultiPASS L60
sends a fax from memory.
E
ECM
Error Correction Mode. The ability of your MultiPASS L60 to reduce system and
line errors when sending or receiving from another fax with ECM capability.
ECM is most effective in areas where the telephone lines are in poor condition or
there is frequent interference on the line. Do not use ECM if you need to send a
document quickly and you are sure the other party can read your transmission
without it (turning off ECM also turns off MMR).
Extension
A telephone connected to the MultiPASS L60 that is used in place of the handset.
You can use the extension telephone to activate incoming reception of documents
manually.
F
Factory default
The MultiPASS L60 is preprogrammed in the factory with settings that we
recommend. These are known as Factory Default Settings. You can customise
your MultiPASS L60 by programming settings other than the Factory Default
Settings.
FAX/TEL switching
This option allows you to set the MultiPASS L60 to automatically detect whether
a call is from a fax or telephone. If the call is from another fax, the transmission is
automatically received. If the call is from a telephone, the MultiPASS L60 rings
to let you know, so you can pick up the handset. With this feature, one telephone
line can be shared by both the telephone and the fax.
FINE
The resolution setting for documents with very small characters and lines.