Filter
Top Products
206Troubleshooting - An Error Message Appears
Error writing to LPT1 or USBPRN
Check 4
Is the printer port operating correctly?
Check the status of the printer port.
• When you are using the parallel interface:
1
Right-click the My Computer icon and select Properties from the pop-up
menu.
2
Click the Device Manager tab.
3
Select Ports (COM & LPT), then double-click Canon BJ LPT Printer Port
(LPT1).
4
In the General tab, make sure Original Configuration (Current) is enabled.
An error occurs if this item is disabled. Read the message under Device
Status and verify no problem is indicated there.
5
Click the Resources tab and read the message under “Conflicting device
list”. If a conflict is indicated, delete the competing device.
• When you are using the USB interface:
1
Right-click the My Computer and then select Properties.
2
Double-click “Universal serial bus controller” on the Device manager tab,
and then double-click Canon S400.
3
Note what is displayed on the General tab.
If the system indicates that there is an error, apply the countermeasures
described in "Quick Start Guide."
For details, refer to the on-line Help.