Filter
Top Products
6-14
When a Error Code Between E500 and E585 Is Displayed
Troubleshooting
6
When a Error Code Between E500 and E585
Is Displayed
When the following error codes are displayed, be sure to turn the main power off and turn it on
again. If the same error code is displayed after performing the operation described above, consult
your Canon service representative. If the service personnel instructs you to set the Staple Shift on/
off, follow the procedure below to perform the setting.
• E500
• E514
• E530
• E531
• E537
• E551
• E577
• E580
• E585
NOTE
•
This setting is available only when the Finisher-L1 is attached.
•
The default setting is <ON>.
1
Press (Additional Functions).
The Additional Functions menu appears and the indicator blinks.
2
Press or to select <5.ADJUST/CLEAN>, and press .
When you press , the <ADJUST/CLEAN> menu appears.
REGISTRATION/SETTING
5.ADJUST/CLEAN