Filter
Top Products
Handling Options
7
7-8
Finisher-L1
Finishing Functions
The Finisher-L1 is equipped with the following functions:
■ Collate Mode
This function automatically collates print sets into page order before they are delivered.
■ Staple Mode
This function automatically collates print sets into page order, staples the sets, and outputs
them.
CAUTION
• Do not place your hand in the output tray while the finisher is attached, as this may result in personal injury.
IMPORTANT
•
The output tray moves down when each set of paper is delivered. When the delivered paper reaches the stacking limit
of the tray, printing stops temporarily. Remove all the paper from the output tray, and the remaining printing and
stapling will restart.
•
You can staple A3 , B4 , A4 , A4 , B5 , 11" x 17" , LGL , LTR , and LTR .
•
You can staple A3 and B4 paper only after installing the additional memory.
•
You cannot staple transparency.