Filter
Top Products
3-9
Setting Specifications That Are Common to Each Function (Common Settings)
Selecting and Storing Settings to Suit your Needs
3
4
Press or to select the stack bypass or paper drawer to be set for the Auto
Paper Selection function, and press .
5
Press or to select <ON> or <OFF> for the stack bypass and each paper drawer,
and press .
To make the stack bypass or paper drawer eligible for APS/ADS, press <ON>.
To make the stack bypass or paper drawer ineligible for APS/ADS, press <OFF>.
NOTE
•
If you select <ON> for the stack bypass, press or to select the paper size to be used on the stack bypass, and
press .
6
Press (Stop) to return to the standby mode.
Setting the Standard Paper for the Stack Bypass
Set the standard paper size for the stack bypass if you always use the same size paper. You do not
need to select the paper size each time you use the stack bypass.
IMPORTANT
•
If you set the standard paper size for the stack bypass, you cannot select the paper size when you use the stack
bypass.
NOTE
•
The default setting is <OFF>.
COPY
1.STACK BYPASS
STACK BYPASS
OFF
STACK BYPASS SIZE
A3