Filter
Top Products
1-17
Main Power and Control Panel Power
Before You Start Using This Machine
1
The below is displayed until the machine gets ready to scan.
The screen below is displayed when the machine is ready to scan.
It takes about 30 seconds (at a room temperature of 20°C) for the machine to warm up.
IMPORTANT
•
If you turn off the main power, wait for at least three seconds before turning the main power back on.
NOTE
•
The standard settings are selected at power on.
•
The standard copy settings are as follows:
- Copy ratio: Direct (100%)
- Paper selection: Auto Paper Selection
- Copy exposure: 5
- Copy quantity: 1
•
You can change the standard copy settings. (See the Copying Guide.)
•
You can reserve a job when the display above appears. (See the Copying Guide.)
3
When a message appears on the display, follow the instructions.
● If the message <ENTER DAC> appears:
▼ Enter the Department ID using the numeric keys, and press .
▼ Enter the Password.
PLEASE WAIT
100% AUTO PAPER
TEXT
01
ENTER DAC
_
ENTER DAC
1
234567
DAC PASSWORD
✱✱✱✱✱✱✱