Filter
Top Products
4-9
Setting the Department ID Management
System Management Settings
4
10
Press (Stop) to return to the standby mode.
Checking the Counter Information
You can check the amount of outputs for each department after setting the Department ID
Management to <ON>.
1
Enter the Additional Functions menu and open the <2.DEPT. ID MANAGEMNT>, and
press .
For details about the procedure above, refer to steps 1 to 3 in “Setting the Use of Department ID
Management,” on p. 4-5.
2
Press or to select <ON>, and press .
When you press , the <DEPT. ID MANAGEMNT> menu appears.
3
Press or to select <2.COUNT MANAGEMENT>, and press .
When you press , the <COUNT MANAGEMENT> menu appears.
4
Press or to select <1.COUNT INFORMATION>, and press .
When you press , the counter information is displayed.
NOTE
•
If you select <2.COUNT RESET> on step 4, and then select <1.ON>, the counter information is deleted.
DEPT.ID MANAGEMNT
ON
DEPT.ID MANAGEMNT
2.COUNT MANAGEMENT
COUNT MANAGEMENT
1.COUNT INFORMATION