Canon IR1600 Printer User Manual


 
x
Power Supply
WARNING
Do not damage or modify the power cord. Also, do not place heavy objects on the power cord, or pull
on or excessively bend it, as this could cause electrical damage and result in a fire or electrical shock.
Keep the power cord away from a heat source; failure to do this causes the cord coating to melt and
results in fire or electrical shock.
Do not insert or unplug the power plug with wet hands, as this may result in electrical shock.
Do not plug the machine into a multi-plug power strip, as this may cause a fire or electrical shock.
Do not bundle up or tie the power cord in a knot, as this may result in a fire or electrical shock.
Insert the power cord completely into the outlet, as failure to do so may result in a fire or electrical
shock.
Do not use power cords other than the provided power cord, as this may result in a fire or electrical
shock.
As a general rule, do not use extension cords. Using an extension cord may result in a fire or
electrical shock. If an extension cord must be used, however, use the type rated for voltages of AC
220-240 V and over and untie the cord binding and insert the power plug completely into the extension
cord outlet to ensure a firm connection between the power and extension cords.
CAUTION
Do not use power supplies with voltages other than those specified, as this may result in a fire or
electrical shock.
Always grasp the plug portion when unplugging the power plug. Pulling on the power cord may
expose or snap the core wire, or otherwise damage the power cord. If the cord is damaged, this could
cause an electricity leak and result in a fire or electrical shock.
Leave sufficient space around the power plug so that it can be unplugged easily. If objects are placed
around the power plug, you will be unable to unplug it in an emergency.
Handling
WARNING
Do not attempt to disassemble or modify the machine. There are high-temperature and high-voltage
components inside the machine which may result in a fire or electrical shock.
If the machine makes strange noises, or emits smoke, heat or unusual smells, immediately turn OFF
the main power switch, and unplug the power plug from the outlet. Then, contact your service
representative or the shop that you purchased this product. Continued use of the machine in this
condition may result in a fire or electrical shock.