Filter
Top Products
4-11
Setting the Department ID Management
System Management Settings
4
5
Press or to select <ON> or <OFF>, and press .
If you want to activate the print limit, select <ON>.
If you do not want to activate the print limit, select <OFF>.
6
Press (Stop) to return to the standby mode.
Specifying Whether or Not to Accept Print Jobs of
Unknown ID
You can specify whether or not to allow printing documents from a printer driver not correspondent
with a stored Department ID.
NOTE
•
The default setting is <ON>.
1
Enter the Additional Functions menu and open the <2.DEPT. ID MANAGEMNT>, and
press .
For details about the procedure above, refer to steps 1 to 3 in “Setting the Use of Department ID
Management,” on p. 4-5.
2
Press or to select <ON>, and press .
When you press , the <DEPT. ID MANAGEMNT> menu appears.
3
Press or to select <4.PRINT WITH NO ID>, and press .
When you press , the <PRINT WITH NO ID> menu appears.
PRINT LIMITS
ON
DEPT.ID MANAGEMNT
ON
DEPT.ID MANAGEMNT
4.PRINT WITH NO ID