Filter
Top Products
System Management Settings
4
4-10
Setting the Department ID Management
5
Press (Stop) to return to the standby mode.
Restricting the Operation by Department ID
When the Department ID Management is set to ON, you can select whether or not to activate the
restriction on printing and copying quantity.
NOTE
•
The factory setting is <OFF>.
1
Enter the Additional Functions menu and open the <2.DEPT. ID MANAGEMNT>, and
press .
For details about the procedure above, refer to steps 1 to 3 in “Setting the Use of Department ID
Management,” on p. 4-5.
2
Press or to select <ON>, and press .
When you press , the <DEPT. ID MANAGEMNT> menu appears.
3
Press or to select <3.RESTRICTIONS>, and press .
When you press , the <RESTRICTIONS> menu appears.
4
Press or to select <1.PRINT LIMITS>, and press .
DEPT.ID MANAGEMNT
ON
DEPT.ID MANAGEMNT
3.RESTRICTIONS
RESTRICTIONS
1.PRINT LIMITS