Filter
Top Products
Selecting and Storing Settings to Suit your Needs
3
3-8
Setting Specifications That Are Common to Each Function (Common Settings)
Setting a Paper Drawer for Auto Paper Selection/
Auto Drawer Switching
You can set the paper drawers to be used for Automatic Paper Selection and Automatic Drawer
Switching. This setting can be made independently for Copy and Printer. This function is useful
when different paper drawers are to be used for different purposes.
NOTE
•
Paper drawers set to <ON> are used for the following functions:
- Auto Paper Selection (APS): The machine automatically selects the appropriate paper size (paper drawer) for the
size of the original and the set ratio (when making a copy).
- Auto Drawer Switching (ADS): If a paper drawer runs out of paper during a continuous printing job, the machine
automatically selects another paper drawer with the same paper size and begins feeding paper from that paper
drawer.
•
The default settings is <OFF> for the stack bypass and <ON> for the paper drawers (1 to 4).
1
Enter the Additional Functions menu and open the <1.COMMON SETTINGS> menu.
For details about the procedure above, refer to steps 1 and 2 in “Setting Keypad Volume, Alarm Volume,
Printing End Tone, and Scanning End Tone,” on p. 3-5.
2
Press or to select <3.DRAWER ELIGIBLTY>, and press .
When you press , the <DRAWER ELIGIBLTY> menu appears.
3
Press or to select <1.COPY> or <2.REPORT>, and press .
COMMON SETTINGS
3.DRAWER ELIGIBLTY
DRAWER ELIGIBLTY
1.COPY