Filter
Top Products
1-33
Making Prints Using the Stack Bypass
Before You Start Using This Machine
1
● Loading envelopes in the stack bypass
▼ Place the envelopes on a level surface and press their edges flat.
▼ Take the envelopes and loosen them as shown, then stack them together.
▼ Load the envelopes as shown below (when printing on the upper side).
IMPORTANT
•
Make sure that the envelopes are not inflated with air. Press the stack of envelopes to empty the envelopes.
•
You cannot print on the back side of the envelopes.
•
Depending on the paper type or condition of the envelopes, the printing quality may deteriorate or paper jam may
occur. In such a case, it is recommended to change the type of envelopes.