Filter
Top Products
Before You Start Using This Machine
1
1-24
Placing Originals
Orientation of Originals
You can place original either vertically or horizontally. Always align the top edge of your original
with the back edge of the platen glass (upper left corner) or the feeder.
Staple copy: place the original with its top upward
IMPORTANT
•
The copies are stapled at the part equivalent to the upper left side of the original.
NOTE
•
If the top edge of the original is not aligned with the back edge of the platen glass, prints may not be made correctly,
depending on the mode you have set.
•
A4, B5 and A5-size originals can be placed either vertically or horizontally. However, the scanning speed for
horizontally placed originals is somewhat slower than for vertically placed originals. You can place originals horizontally
when printing with Preset Zoom mode, such as when processing A4
→
A3 .
•
Horizontally placed A4, B5 and A5-size originals are referred to as A4 , B5 and A5 .
•
A3 and B4-size originals must be placed horizontally.
•
To get the same output result as when the original is placed on the platen glass, place it upside-down and face up.
However, when using the stapler function, the Finisher rotates the output automatically.
[Platen glass]
Copies are stapled here. Copies are stapled here.
Original
(face down)
Original (face down)
Vertical placement Horizontal placement
[Feeder]
ABC ABC
Copies are stapled here. Copies are stapled here.
Original
(face up)
Original
(face up)
Vertical placement Horizontal placement