Filter
Top Products
152 Troubleshooting
Document Jams in the ADF
Important
When you turn off the machine to remove the jammed document, make sure of the following.
z While the machine is receiving a fax (in memory), you cannot turn off the machine. Turn it off after
receiving the fax. Do not disconnect the power cord while the machine is receiving a fax. If you
disconnect the power cord, all the documents stored in memory are deleted.
Cause Action
The document remains in the ADF
because the Stop/Reset button is
pressed when the machine is scanning
the document.
If you press the Stop/Reset button during scanning, “Document in ADF. Press
OK to discharge document.” appears on the LCD. Press the OK button so that
the remaining document is automatically fed out.