Filter
Top Products
90 Faxing
Receiving Faxes
Flow of Receiving Faxes
The operation flow of receiving faxes is as follows:
Step 1
Select a receive mode.
See “Selecting a Receive Mode” on page 90.
Step 2
Load A4, Letter, or Legal-sized paper.
See “Loading Printing Paper” on page 20.
Step 3
Confirm the paper settings and adjust them as needed.
See “Changing the Print Settings” on page 96.
Selecting a Receive Mode
Select a receive mode according to your needs.
z When you receive mainly faxes and sometimes voice calls:
Select FAX priority mode.
z When you have a dedicated telephone line for fax use only:
Select FAX only mode.
z When you receive mainly voice calls and sometimes faxes:
Select TEL priority mode.
z When you subscribe to a ring pattern detection service provided by your telephone company,
and you want to receive a fax only if the machine detects the pattern for fax:
Select DRPD
*1
or Network switch
*2
.
*1
This setting is only available in US and Canada.
*2
This setting may not be available depending on the country or region of purchase.
Important
z The machine cannot receive faxes when the power is turned off. Press the ON/OFF button to
turn the power on.
z To cancel receiving, press the Stop/Reset button and follow any instructions on the LCD.
Note
If you want to use a single telephone line for faxes and voice calls, you need to connect a
telephone or an answering machine to the External Device Jack of this machine.