Filter
Top Products
19-12
Cisco ONS 15454 SDH Procedure Guide, R7.2
October 2007
Chapter 19 DLPs D200 to D299
DLP- D215 Consolidate Links in Network View
Step 1 From the View menu, choose Go to Network View. CTC shows the link icons by default.
Step 2 As needed, perform one or more of the following steps:
• To toggle link icons on and off, go to Step 3.
• To combine all the links in network view, go to Step 4.
• To consolidate a link or links between two nodes, go to Step 5.
• To view information about a consolidated link, go to Step 6.
• To access an individual link within a consolidated link, go to Step 7.
• To expand consolidated links, go to Step 8.
• To filter links by class, go to Step 9.
Step 3 Right-click the network map and select Show Link Icons to toggle the link icons on and off.
Step 4 To consolidate all the links on the network map (global consolidation):
a. Right-click anywhere on the network map.
b. Choose Collapse/Expand Links from the shortcut menu. The Collapse/Expand Links dialog box
appears.
c. Select the check boxes for the link classes that you want to consolidate.
d. Click OK. The selected link classes are consolidated on the network map.
Step 5 To consolidate a link or links between two nodes:
a. Right-click the link on the network map.
b. Choose Collapse Link from the shortcut menu. The selected link type consolidates to show only
one link.
Note The links consolidate by class. For example, if you select a DCC link for consolidation only the
DCC links will consolidate, leaving any other link classes expanded.
Figure 19-1 shows a network view with unconsolidated DCC and PPC links.
Figure 19-1 Unconsolidated Links in Network View
Figure 19-2 shows a network view with globally consolidated links.