Filter
Top Products
19-47
Cisco ONS 15454 SDH Procedure Guide, R7.2
October 2007
Chapter 19 DLPs D200 to D299
DLP- D243 Create a VLAN
DLP-D243 Create a VLAN
Step 1 From the View menu, choose Go to Network View.
Step 2 From the Tools menu, choose Manage VLANS.
Step 3 In the All VLANs dialog box, click Create.
Step 4 In the Define New VLAN dialog box, complete the following:
• VLAN Name—Assign an easily identifiable name to your VLAN.
• VLAN ID—Assign a VLAN ID. The VLAN ID should be the next available number between 2 and
4093 that is not already assigned to an existing VLAN. Each ONS 15454 SDH network supports a
maximum of 509 user-provisionable VLANs.
• Topology Host—Choose the node to serve as the topology host from the drop-down list. The
topology host is used to discover the VLAN topology. The login node is the default.
Step 5 Click OK.
Step 6 Click Close.
Step 7 Return to your originating procedure (NTP).
Purpose This task creates a new VLAN.
Tools/Equipment None
Prerequisite Procedures See Chapter 6, “Create Circuits and Low-Order Tunnels” for circuit
creation procedures.
Required/As Needed As needed
Onsite/Remote Onsite or remote
Security Level Provisioning or higher