Filter
Top Products
19-14
Cisco ONS 15454 SDH Procedure Guide, R7.2
October 2007
Chapter 19 DLPs D200 to D299
DLP- D216 Change the STM-N Card ALS Maintenance Settings
b. Check the check boxes next to the links that you want to display.
c. Click OK.
Step 10 Return to your originating procedure (NTP).
DLP-D216 Change the STM-N Card ALS Maintenance Settings
Note For the default values and domains of user-provisionable card settings, refer to the “Network Element
Defaults” appendix in the Cisco ONS 15454 SDH Reference Manual.
Step 1 In node view, double-click the STM-N card where you want to change the ALS maintenance settings.
Step 2 Click the Maintenance > ALS tabs.
Step 3 Modify any of the settings described in Table 19-2 by clicking in the field you want to modify. In some
fields you can choose an option from a drop-down list; in others you can type a value or select or deselect
a check box. The provisionable parameters are listed in the options column in the table.
Table 19-1 Link Classes By Network Scope
Network Scope Displayed Link Classes
ALL DCC, GCC, OTS, PPC, Server Trail
DWDM GCC, OTS, PPC
TDM DCC, PPC, Server Trail
Purpose This task changes the automatic laser shutdown (ALS) maintenance
settings for the STM-N cards. This feature is available for STM-64 and
MRC-12 cards.
Tools/Equipment None
Prerequisite Procedures DLP-D60 Log into CTC, page 17-49
Required/As Needed As needed
Onsite/Remote Onsite or remote
Security Level Provisioning or higher