Filter
Top Products
33
Chapter3:AdvancedConfiguration
UserGuide
Administration>Diagnostics
Thediagnostic tests (Ping andTraceroute)allow youto
checktheconnectionsofyournetworkdevices,including
connectiontotheInternet.
Administration>Diagnostics
Diagnostics
PingTest
ThePingtestchecksthestatusofaconnection.
IP or URL Address Enterthe address ofthecomputer,
device,orwebsitewhoseconnectionyouwishtotest.
Packet Size Enterthepacketsizeyouwanttouse.The
defaultis32bytes.
Times to Ping Entermanytimesyouwishtotestit.
Start to Ping Torunthetest,clickthisbutton.ThePing
Testscreenwillshowifthetestwassuccessful.ClickClose
toreturntotheDiagnosticsscreen.
Diagnostics>Ping
TracerouteTest
TheTraceroutetestteststheperformanceofaconnection.
IP or URL Address Enterthe address ofthecomputer,
device,orwebsitewhoseconnectionyouwishtotest.
Start to Traceroute Torunthetest,clickthisbutton.The
Traceroute Testscreenwillshowifthetestwassuccessful.
ClickClosetoreturntotheDiagnosticsscreen.
Diagnostics>Traceroute
Administration>FactoryDefaults
The Administration > Factory Defaults screen allowsyou
torestoretheValet’sconfigurationtoitsfactory default
settings.
Administration>FactoryDefaults
NOTE: Do not restore the factory defaults
unlessyouarehaving difficultieswiththeValet
andhaveexhaustedallothertroubleshooting
measures.OncetheValetisreset,youwillhave
tore-enterallofyourconfigurationsettings.
FactoryDefaults
Restore All Settings To reset the Valet’s settings to
thedefaultvalues,clickthisbuttonandthenfollowthe
on-screeninstructions.Anysettingsyouhavesavedwill
belostwhenthedefaultsettingsarerestored.