Filter
Top Products
2-2
Cisco Physical Access Gateway User Guide
OL-20932-02
Chapter 2 Installing and Configuring the Cisco Physical Access Gateway
Overview
Overview
The Cisco Physical Access Gateway (Figure 2-1) is installed near each door to provide access control
and connections for card readers, door locks and other input and output devices. The Gateway is
connected to the Cisco Physical Access Manager using an Ethernet connection to the IP network. Power
is supplied through a Power over Ethernet (PoE) connection, or using a DC power source. Each Gateway
includes connections for up to two Wiegand door readers, three input devices, and three output devices.
Optional expansion modules are available to add additional doors and devices to the Gateway.
Figure 2-1 Cisco Physical Access Gateway