Filter
Top Products
Contents
iv
Cisco Physical Access Gateway User Guide
OL-20932-02
Entering the Gateway Network Settings 2-17
Changing the User Password 2-19
Upgrading the Gateway Firmware Using a Direct Connection 2-20
Displaying Serial Numbers and Other Information 2-22
Configuring the Gateway Using the Cisco Physical Access Manager 2-23
Resetting the Cisco Physical Access Gateway 2-24
Soft Reset (Powercycle) 2-24
Hard Reset (Restore Factory Defaults) 2-24
CHAPTER
3 Connecting a Cisco Reader Module 3-1
Overview 3-1
Package Contents 3-2
Physical Overview and Port Description 3-3
Status LEDs 3-6
Installing the Cisco Reader Module 3-6
CHAPTER
4 Connecting a Cisco Input Module 4-1
Overview 4-1
Package Contents 4-2
Physical Overview and Port Description 4-3
Status LEDs 4-5
Installing the Cisco Input Module 4-5
CHAPTER
5 Connecting a Cisco Output Module 5-1
Overview 5-1
Package Contents 5-2
Physical Overview and Port Description 5-3
Status LEDs 5-5
Installing the Cisco Output Module 5-6
APPENDIX
6 Safety Warnings 6-1
Statement 1071—Warning Definition 6-1
Statement 369—Power over Ethernet (PoE) IEEE 802.3af 6-6
Statement 353—This Product Must be Connected 6-7
Statement 1040—Product Disposal 6-9
Statement 1004—Installation Instructions 6-10