Filter
Top Products
Configuring VPN
VPN Clients
Cisco RV215W Wireless-N VPN Firewall Administration Guide 102
9
STEP 3 Click Save.
Configuring QuickVPN
STEP 1 Add the QuickVPN users on the VPN > VPN Clients page. See Importing VPN
Client Settings and Creating and Managing QuickVPN Users.
STEP 2 Instruct users to obtain the free Cisco QuickVPN software from Cisco.com, and
install it on their computers. See Using the Cisco QuickVPN Software
STEP 3 To enable access using Cisco QuickVPN on your device, you must enable remote
management to open port 443 for SSL. See Configuring Basic Firewall Settings.
Configuring NetBIOS over VPN
To enable NetBIOS over VPN:
STEP 1 In the NetBIOS over VPN field, check the box to allow NetBIOS broadcasts to
travel over the VPN tunnel. By default, the NetBIOS feature is available to client
policies.
STEP 2 Click Save.
Creating and Managing PPTP Users
To create PPTP users:
STEP 1 In the VPN Client Setting Table, click Add Row.
IP Address for PPTP
Clients
Enter the IP address range of PPTP clients.
MPPE Encryption Check the Enable box to enable MPPE encryption.
Microsoft Point-to-Point Encryption (MPPE) is used
when users set up and use a PPTP VPN client to
connect to the device.