Filter
Top Products
Administering Your Router
Configuring User Accounts
Cisco RV215W Wireless-N VPN Firewall Administration Guide 124
11
Configuring User Accounts
The device supports two user accounts for administering and viewing settings: an
administrative user (default user name and password: cisco) and a guest user
(default user name: guest).
The guest account has read-only access. You can set and change the username
and password for both the administrator and guest accounts.
To configure the user accounts:
STEP 1 Choose Administration > Users.
STEP 2 In the Account Activation field, check the boxes for the accounts you want to
activate. The admin account must be active.
STEP 3 (Optional) To edit the administrator account, under Administrator Account
Setting, check Edit Administrator Settings. To edit the guest account, under
Guest Settings, check Edit Guest Settings. Enter the following information:
STEP 4 To import user names and passwords from a CSV file:
a. In the Import User Name & Password field, click Browse.
b. Locate the file and click Open.
c. Click Import.
STEP 5 Enter the old password.
STEP 6 Click Save.
New Username Enter a new username.
Old Password Enter the current password.
New Password Enter the new password. We recommended that
you make sure that the password contains no
dictionary words from any language, and is a mix of
letters (both uppercase and lowercase), numbers,
and symbols. The password can be up to 64
characters long.
Retype New Password Re-enter the new password.