Filter
Top Products
Configuring Networking
Configuring IPv6
Cisco RV215W Wireless-N VPN Firewall Administration Guide 53
6
STEP 3 (Optional) If you are using 6to4 tunneling, which allows IPv6 packets to be
transmitted over an IPv4 network, do the following:
a. Click Show Static 6to4 DNS Entry.
b. In the Domain and IP fields, enter up to five domain-to-IP mappings.
The 6to4 tunneling feature is typically used when a site or end user wants to
connect to the IPv6 Internet using the existing IPv4 network.
STEP 4 Click Save.
Configuring IPv6
Internet Protocol version 6 (IPv6) is a version of the Internet Protocol (IP) intended
to succeed Internet Protocol version 4 (IPv4). Configuring WAN properties for an
IPv6 network depends on the type of Internet connection that you have.
Configuring the IPV6 WAN Connection
You can configure the device to be a DHCPv6 client of the ISP for this WAN or to
use a static IPv6 address provided by the ISP.
To configure IPv6 WAN settings on your device, you must first set the IP mode to
one of the following modes:
• LAN:IPv6, WAN:IPv6
• LAN:IPv4+IPv6, WAN:IPv4
• LAN:IPv4+IPv6, WAN:IPv4+IPv6
See Configuring the IP Mode for instructions on how to set the IP mode.
Configuring DHCPv6
If your ISP provides you with a dynamically assigned address, configure the
device as a DHCPv6 client.