Filter
Top Products
Configuring the Firewall
Configuring Basic Firewall Settings
Cisco RV215W Wireless-N VPN Firewall Administration Guide 88
8
STEP 3 Click Save.
Configuring Remote Management
You can enable remote management so you can access the device from a remote
WAN network.
To configure remote management, configure these settings on the Basic Settings
page:
FTP ALG Click Auto to use the default FTP port 21. Click
Manual to enter the port number through which
you want to direct FTP traffic on the device.
Remote Management Check Enable to enable remote management.
Remote Access Choose the type of web access that can be used
to connect to the firewall: HTTP or HTTPS (secure
HTTP).
Remote Upgrade To allow remote upgrades of the device, check
Enable.
Allowed Remote IP
Address
Click the Any IP Address button to allow remote
management from any IP address, or enter a
specific IP address in the address field.
Remote Management
Port
Enter the port on which remote access is allowed.
The default port is 443. When remotely accessing
the router, you must enter the remote management
port as part of the IP address. For example:
https://<remote-ip>:<remote-port>, or
https://168.10.1.11:443