Filter
Top Products
Introduction
Using the Getting Started Page
Cisco RV215W Wireless-N VPN Firewall Administration Guide 11
4
Configuration Next Steps
Although Setup Wizard automatically configures the device, we suggest
customizing some settings to provide better security and performance:
• If you already have a DHCP server on your network and you do not want the
device to act as a network DHCP server, disable the server. See Configuring
the LAN Settings.
• Configure your Virtual Private Network (VPN) by using QuickVPN. QuickVPN
is included on the CD that shipped with your firewall. See Appendix A,
“Using the Cisco QuickVPN Software.”
• The device supports up to four wireless networks. You can only set up one
wireless network (or SSID) by using Setup Wizard. To configure additional
wireless networks using Device Manager, see Configuring the Wireless
Network.
Using the Getting Started Page
The Getting Started page displays the most common device configuration tasks.
Use the links on this page to jump to the relevant configuration page.
This page appears every time you start Device Manager. To change this behavior,
check Don’t show on start up.
Initial Settings
Change Default
Administrator Password
Displays the Users page where you can change
the administrator password and set up a guest
account. See Configuring User Accounts.
Launch Setup Wizard Launches the Setup Wizard. Follow the on-screen
instructions.