Filter
Top Products
Configuring the SSL VPN Client
SSL VPN User’s Guide 4-5
5. Select the Use native login window for next time login option and click
OK. The updated configuration details of the profile are displayed.
4.1.3 Setting the SSL VPN Gateway
When configured to function in the Native Login mode, the client uses the pre-
configured IP address of the gateway to connect to it. You can configure the
client to connect to another gateway. This procedure lists the steps to specify
the SSL VPN gateway that the client needs to connect to.
Note This setting is restricted to the agent and is not available via the plug-in.
1. Check the Windows system tray for the icon. This indicates that the
agent is idle and that you are currently logged out. If the icon is absent,
click
Start > Programs > Citrix Access Gateway Enterprise Edition >
Launch SSL VPN client
. The icon is displayed in the system tray.
2. Right-click the icon and select
Login from the short-cut menu. The Citrix
Access Gateway Enterprise Edition dialog box is displayed as shown in
Figure 4-1.
3. Right-click
Right-click for advanced options and select Advanced
Options
from the short-cut menu. The Citrix Access Gateway Options dia-
log box is displayed as shown in the following figure.
Figure 4-6 Citrix Access Gateway Options dialog box
4. Enter the URL of the SSL VPN gateway in the Gateway URL: field and click
OK. The Gateway Enterprise Edition dialog box is displayed.