Filter
Top Products
Adding and Replacing Parts 107
4
Disconnect your computer and all attached devices from their electrical outlets.
5
Remove the battery.
Slide and hold the battery-bay latch release on the bottom of the computer, and then pull the
battery out of the battery bay.
6
Remove the optical drive, if installed, from the optical drive bay. See "Optical Drives" on
page 111.
7
Press the power button to ground the system board.
8
Remove any installed ExpressCards from the ExpressCard slot. See "Removing an
ExpressCard or Blank" on page 68.
9
Remove any installed media memory cards from the 5-in-1 media memory card reader. See
"Removing a Media Memory Card or Blank" on page 72.
10
Close the display and turn the computer upside down on a flat work surface.
11
Remove the hard drive. See "Hard Drive" on page 108.
1 battery 2 battery-bay latch release
2
1
book.book Page 107 Wednesday, October 26, 2005 1:00 PM