Filter
Top Products
124 Adding and Replacing Parts
www.dell.com | support.dell.com
NOTICE: To avoid damaging the system board, you must remove the main battery before you begin
working inside the computer.
NOTICE: The hinge cover is fragile and can be damaged if extreme force is used. Be careful when
removing the hinge cover.
1
Follow the procedures in "Before You Begin" on page 105.
2
Remove the battery (see page 108).
3
Remove the two screws inside the battery bay.
4
Turn the computer right-side up, and then open the display all the way (180 degrees) so that
it rests on your work surface.
NOTICE: To avoid damaging the hinge cover, do not lift the cover on both sides simultaneously.
5
Insert a scribe into the indent to lift the hinge cover on the right side.
1 screws (2)
1
book.book Page 124 Wednesday, October 26, 2005 1:00 PM