Filter
Top Products
116 Adding and Replacing Parts
www.dell.com | support.dell.com
3
Remove the hinge cover. See "Hinge Cover" on page 123.
NOTE: Ensure that you remove the two screws in the battery bay as part of the hinge removal
procedure.
4
Remove the keyboard. See "Keyboard" on page 125.
5
Loosen the captive screws on the memory module cover, and then remove the memory
module cover.
NOTICE: To prevent damage to the memory module connector, do not use tools to spread the memory-
module securing clips.
6
If you are replacing a memory module, remove the existing module:
a
Use your fingertips to carefully spread apart the securing clips on each end of the memory
module connector until the module pops up.
b
Remove the module from the connector.
1 tab in connector slot
1
book.book Page 116 Wednesday, October 26, 2005 1:00 PM