Filter
Top Products
120 Adding and Replacing Parts
www.dell.com | support.dell.com
3
Remove the existing modem:
a
Remove the screw securing the modem to the system board, and set it aside.
b
Pull straight up on the attached pull-tab to lift the modem out of its connector on the
system board, and disconnect the modem cable.
4
Install the replacement modem:
a
Connect the modem cable to the modem.
NOTICE: The connectors are keyed to ensure correct insertion. If you feel resistance, check the
connectors and realign the card.
b
Align the modem with the screw holes and press the modem into the connector on the
system board.
c
Replace the screw that secures the modem to the system board.
5
Replace the modem/Mini PCI/wireless cover.
1 screw 3 modem 5 system board connector
2 modem cable 4 pull-tab
4
5
1
2
3
book.book Page 120 Wednesday, October 26, 2005 1:00 PM