Filter
Top Products
Appendix 111
NOTICE: If you pry the battery out of its socket with a blunt object, be careful not to touch the
system board with the object. Ensure that the object is inserted between the battery and the
socket before you attempt to pry out the battery. Otherwise, you may damage the system board
by prying off the socket or by breaking circuit traces on the system board.
7
Remove the battery by carefully prying it out of its socket with your fingers or with a
blunt, nonconducting object such as a plastic screwdriver.
8 Insert the new battery into the socket with the side labeled "+" facing up, and snap the
battery into place.
9 Replace the computer cover (see page 99).
NOTICE: To connect a network cable, first plug the cable into the network wall jack and then
plug it into the computer.
10
Connect your computer and devices to electrical outlets, and turn them on.
11 Enter system setup (see page 106) and restore the settings you recorded in step 1.
12 Properly dispose of the old battery (see page 12).
battery socket
battery
J2936bk0.book Page 111 Tuesday, September 2, 2003 3:06 PM