Dell 56F Switch User Manual


 
support.dell.com Troubleshooting 5-9
not sent, the switch does not know the port is connected to another port on the same
switch and the test fails.
An example error message would be similar to the following:
310*11$5310*9%/$31(35310*R1$5310*$1(%=$5310*
(//#$0$5310*#$0$#5310*9%/$F/%*5310*30$05310*9%/$0;#($
%(#%&
The
sramRetentionTest
verifies that data written into the ASIC memories are
retained and that data bits to no drop when read after some amount of delay since the
write. The switch must be offline.
An error message would look similar to the following example:
310*/(*(//5310*/(*(//N=/#$5310*;=#N$1(%=$
((#%&
The
cmemRetentionTest
verifies that data written into the SRAMs that make up the
central memory are retained and that data bits do not drop when read after some
amount of delay since the write. The switch must be offline.
An error message would look similar to the following example:
310*2"(5310*2"/#5310*2"$%
#"&
Pressing <Enter> while
DisplayTest
is selected causes a test of characters to be dis-
played. Use this test to determine that the display is functioning properly.
&
Pressing <Enter> while
PushButtonTest
is selected displays several button numbers.
Pressing any front panel button causes the corresponding button number to move to
the second line. To exit this test, simultaneously press 1 <Down> and 4 <Enter>.