Filter
Top Products
support.dell.com PowerVault 56F 16-Port Fibre Channel Switch Commands 4-39
#
The
mcastShow
command, without parameters, displays multicast tree information
for all the multicast groups. With a parameter (group number), it displays information
about one multicast group only.
#
The
nbrStateShow
command displays neighbor's summary information. This infor-
mation can also be retrieved using
interfaceShow.
The command provides essential
information to determine the fabric topology in a concise way. By using this com-
mand, you can discover the domain ID of all switches adjacent to the local switch, and
the port number on the local and remote switch. The fields are described in
Table 4-24.
With no parameters, it displays the neighbor's state summary for all the neighbors
instead of a neighbor connected to port 0 only.
The command syntax is
nbrStateShow
to list all neighbors.
The command syntax is
4##6B8
to list the neighbor on the spec-
ified port.
linkCnt
The link count, is the number of neighbors in NB_ST_FULL state
that are adjacent to the switch described by this record. The
linkCnt field is followed by a number of lines equal to the link
count.
output port
Output port is the ISL port number connecting the neighbor
switch.
linkID
The neighbor switch’s domain ID.
rem port
The port on the remote switch that the local port (out port) is con-
nected to.
costCnt
The cost of sending a frame over the ISL connected to this port.
It is the same value as the cost in the neighbor data structure of
the switch described by this record. It is always 0.
type
Always 1.
((!!''
%
Local Port
Corresponds to idbNo in the neighbor data structure
Domain
Corresponds to nghbId
in the neighbor data structure
Remote Port
Corresponds to remPort
in the neighbor data structure
($*!!''
%