Filter
Top Products
support.dell.com PowerVault 56F 16-Port Fibre Channel Switch Commands 4-7
entered at the prompt, as shown in Figure 4-1. The various configuration settings and
parameters are described in Table 4-4, Table 4-5, Table 4-6, Table 4-7 and Table 4-8.
(%!!'*,&
Entering out-of-range or inappropriate values causes an error message to be displayed
on the screen and the original entry prompt to be redisplayed as shown in Figure 4-3.
To cancel the
configure
command at any time, send an interrupt control character by
pressing <Ctrl> <c>. To complete the command at any time, with the current
changes saved, send an end-of-file control character by pressing <Ctrl><d>.
switch:admin> configure
Configure...
Fabric parameters (yes, y, no, n): [no]
Virtual Channel parameters (yes, y, no, n): [no]
Arbitrated Loop parameters (yes, y, no, n): [no]
System services (yes, y, no, n): [no]
No changes.